Brick Paver Installation & Edging



Staging of material

Many paver tasks will vary depending on gain access to, site conditions, task size and of course, the weather. Mindful consideration should be taken to identify the time to begin the paver installation.

The supervisor or project supervisor ought to constantly have the materials (sand/ pavers) distributed around the task site for simple and effective installations. Paver pallets/bundles must be placed in a manner not to hinder the paver installation. The proper pallet/bundle placement can make the real project installation simpler and quicker by reducing the total labor of dealing with the product.

Brick paver patterns

Pavers can be placed in various patterns depending upon their shape. Each paver shape will typically have numerous different hatch patterns that are supplied by the manufacturer.

Contractors require to take into factor to consider the traffic weight loads on their paver projects. In many applications around the world, it has actually been shown that pavers laid in a herringbone pattern have carried out adequately.

Pavers that are 60 mm (2 - 3/8 in) thickness appropriate for pedestrian applications. Pavers that are going to be utilized in industrial or industrial applications must be 80 mm (3 - 1/8 in) in density.

Reference/starting point for brick paver installation

There are a number of conditions that identify the beginning point of a paver task.

When starting to install pavers it is best to snap a real straight chalk line on the surface of the bed linen sand or pull a real straight string line above the surface of the bedding sand at the completed elevation of the pavers This will assist as a guide for keeping straight joint lines and will also enable the installer to make changes in the alignment of the pavers.

Buildings and concrete suppressing are usually not straight and should not be used for developing straight joint lines. Making use of string lines is essential to determine the true straightness of the edge also. As the paver installation advances, the string lines will assist minimize the need for small trim pieces.

Joint width in between pavers must be in between 1/16 and 3/16 in (2 and 5 mm ). There are some pavers with spacer bars on their sides. These will maintain a minimum joint width and allow the bedding and jointing sand to go into between each paver. Pavers with spacer bars are normally not laid in snug versus each other given that a string line will provide consistent joint spacing.

Installation of brick pavers.

One of the most commonly used techniques for the installation of pavers is hand installation of each paver. It is best to install a single row of pavers along one of the true straight lines that you have pulled or above the bedding sand. This will give you a straight and true line off which to work. When this row is established, you can continue to work outside into the field with the rest of the pavers. Constantly ensure to regularly inspect your joint lines to make sure they are real and straight. If not, modifications to the pavers can be made as you continue setting up. Pavers must be set up hand tight. The very best technique is to position a paver versus another one and let it move down into the bed linen sand. Do not kick or tap the pavers into location as this can toss your lines out of real straightness.

When setting up pavers on a high grade, they must be installed at the base of the grade going uphill. This will prevent the pavers from creeping as they are being laid.

On large commercial and industrial applications, hand laying pavers would not be cost effective due to the labor intensity. The very best method for setting up pavers on big jobs is to install them mechanically. Using a mechanical laying device can install roughly 6000 - 7000 sq ft a day. There are a couple products a professional ought to consider before installing pavers mechanically:

1.) Mechanical installers are only capable of setting up pavers in particular patterns.

2.) The specialist needs to ensure that the producer is capable of manufacturing and bundling pavers in the desired pattern on the pallets for simple mechanical installation.

Poor color mixing could result in a patchy looking installation. Most makers are constant with color blending on each bundle of pavers, however it is the professional's obligation to ensure proper mixing in the field.

Cutting treatments for brick pavers.

Professionals typically have 2 methods of cutting pavers. Pavers are cut either by 1). A double bladed guillotine or by 2). A gas powered cut off saw or brick saw which is equipped with a diamond blade. The diamond blade cut-off saw or brick saw will offer a much cleaner and more precise cut. Many brick saws will have a hose attachment on them which will enable the operator to cut the pavers damp. When cutting pavers wet, it will help reduce dust and will lengthen the diamond blades life. The operator of the brick saw ought to always cut the pavers away from the surface area of the paver field when cutting wet, due to the Koi Pond Florida fact that the pavers will develop a slurry that will stain the paver surface. Pavers that are cut should not fit tight, sufficient spacing needs to be offered for jointing sand.

The brick saw operator must always use the appropriate protection that is required for operating a saw, such as eye, ear, breathing and hand security ).

Edging types

Edge restraints play a major function in the overall success of an interlocking pavement installation Edging restraints remove lateral movement of the pavers and hold the pavers securely together. Particularly at the outer boundary of the paver application, without an edging restraint, your project is ensured to stop working over time.

Usually manufactured edge restraints are the most frequently used by specialists. Manufactured edging restraints can vary from, plastic edging, steel and aluminum, timbers or precast concrete and stone.

Edging installation.

This could result in the migration of the bed linen sand and ultimate lateral motion of the pavers. If there is a possibility of losing bedding sand in between the pavers and the edge restraint, then geo textile material is recommended. When a space in between the pavers and the edging exceeds 3/8" (10mm), then the area needs to be filled with cut pavers.

Compaction of brick pavers.

After installation, the pavers need to be compressed. The whole area that is to be compacted need to be swept clean of any foreign items and particles that can trigger scratching or scuffing on the surface of the pavers.

In addition, it is important that the first compaction takes location prior to any jointing sand has been applied to the pavers. If jointing sand is used to the pavers prior to compaction takes location, this can cause a bridging problem and will not enable the joints to be entirely filled with jointing sand. This can likewise prevent the pavers from being correctly set into the bed linen sand.

When condensing the pavers, it is recommended that you make a minimum of two passes in different instructions throughout the pavers. This will permit the pavers to be properly set in the bedding sand and will require the bed linen sand up into the joints from the bottom of the pavers.

The compaction of the pavers is really critical to the final performance of the pavers. Failure to do appropriate compaction can lead to contortions and pavement failure over time.


Paver pallets/bundles should be placed in a manner not to interfere with the paver installation. One of the most commonly utilized approaches for the installation of pavers is hand installation of each paver. The operator of the brick saw should always cut the pavers away from the surface of the paver field when cutting damp, due to the fact that the pavers will create a slurry that will stain the paver surface. Edging restraints get rid of lateral motion of the pavers and hold the pavers securely together. When a space in between the pavers and the edging goes beyond 3/8" (10mm), then the space should be filled with cut pavers.

Leave a Reply

Your email address will not be published. Required fields are marked *